Step One: Selection means wall TV, you have to pay attention to the surrounding environment of the TV. If the environment is too wet, it will affect the life and safety of TV signal and the viewing experience. A good amount of height TV is base to the height of the floor between 110cm-120cm. Device orientation: means for flat-panel TVs, the viewing interval of at least 3-5 times the diagonal of the display interval, the height of the device should be the user sitting on a stool or both eyes flat television production bases on the couch (or slightly below) is appropriate, usually TV base point from the ground is 1.3m or so.
Step Two: Install TV wall mount bracket. Usually rack iron kind in 2cm-3cm.
Step Three: The interval from pylons according to the scale of a purchase from a measure based on bracket to the bottom edge of millet television.
Step Four:The hanger has a level to avoid imbalance before drilling to.
Step Five: Keep the network cable plugged in. TV hang in the end after the base plugged various lines, adjust the TV mercy interval, fixed hook screw.
No comments:
Post a Comment